If your Bissell ProHeat 2X Revolution Pet Turbo is leaving water on your carpets instead of just cleaning, it can be frustrating. This common issue often results from drainage problems, clogged filters, or other minor mechanical hitches. Fortunately, most fixes are straightforward and safe to perform at home, helping you restore your cleaner’s performance quickly.
In this guide, you’ll find step-by-step instructions to identify and resolve the cause of excess water leakage, ensuring your carpet cleaning sessions are both effective and efficient.
Key Takeaways
| Identify the cause | Determine if the water issue stems from drainage, filters, or other blockages. |
| Check filters and hoses | Clogged filters or hoses are common culprits and easy to clean. |
| Inspect the water tank | Ensure the water tank is seated properly and not cracked. |
| Examine the seals | Damaged or worn seals can cause leaks and should be replaced. |
| Test after repairs | Run a short cleaning cycle to confirm the fix is successful. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Unplug and Prepare Your Machine
Before starting any troubleshooting, unplug your Bissell ProHeat 2X Revolution Pet Turbo from the power outlet. Remove the water tank carefully by lifting it straight up from the back of the unit. Place the tank on a flat surface and inspect it for any visible cracks or damage. This initial step ensures safety and allows you to examine the primary water reservoir for issues.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Step 2: Check and Clean the Water Tank and Cap
- Remove the water tank and rinse it thoroughly with clean water to eliminate any mineral buildup or debris.
- Inspect the tank’s cap and sealing gasket; make sure they are clean and properly seated.
- Ensure the tank’s outlet and inlet ports are free of obstructions.
- Reinstall the tank securely, making sure it clicks into place.
If the tank or cap is cracked or damaged, replace it with an OEM or compatible part to prevent leaks.
Step 3: Examine and Clean Filters and Hoses
- Locate the filters—these are usually accessible behind or near the water tank or on the clean water inlet.
- Remove the filters and wash them with warm, soapy water. Rinse thoroughly and let dry.
- Check the hoses connected to the water tank and the cleaning head for blockages or kinks.
- Use a small brush or a pipe cleaner to clear any debris inside hoses.
- Reattach all hoses securely.
Clogged filters or hoses can restrict proper water flow, causing excess water to leak or remain in the tank.
Step 4: Inspect and Replace Seals and Gaskets
Damaged or worn seals can lead to leaks. Carefully examine the seals around the water tank, the clean water inlet, and the recovery compartment. If you notice cracks, tears, or hardening, replace them with compatible seals. This step helps maintain a tight seal, preventing water from escaping during cleaning cycles.
Step 5: Test the Machine and Final Checks
After completing the cleaning and inspection steps, reassemble the machine and plug it back in. Fill the water tank and run a short cleaning cycle to observe if water leaks or leaves excess water behind. Monitor all connection points and the tank for any signs of dripping or pooling.
If issues persist, revisit the previous steps or consult the user manual for specific troubleshooting tips related to your model.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Power: TurboStrength Motor
- ✔ Cleaning Modes: MAX & Express
- ✔ Technology: Heatwave
JORAIR Brush Replacement Compatible
- ✔ Compatibility: Multiple Bissell CrossWave models
- ✔ Includes: 3 brush rolls and filters
- ✔ Material: High-quality plastic and bristles
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful cleaning with advanced features like TurboStrength™ Motor and Heatwave Technology. Its design minimizes water left behind, but occasional issues like leaks can occur. Regular maintenance helps keep it performing optimally.
Pros:
- 40% more suction power
- Effective pet stain removal
- Quiet operation with noise reduction
- Quick dry with express mode
Cons:
- Water leaks if seals are worn
- Filters may need frequent cleaning
- Tank can be heavy when full
Best for: Pet owners and heavy-duty carpet cleaning
Not ideal for: Light or occasional cleaning tasks
Bottom line: A powerful, pet-friendly carpet cleaner with effective features, but regular maintenance is key to preventing leaks.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible is a cost-effective way to ensure your Bissell crosswave maintains optimal performance. It fits various models and helps improve cleaning efficiency, especially if your original brush is worn or damaged.
Pros:
- Compatible with multiple Bissell models
- Easy to install
- Restores cleaning power
- Affordable replacement
Cons:
- Only compatible with specific models
- May require adjustments for perfect fit
- Brush longevity varies with use
Best for: Replacing worn or damaged brush rolls
Not ideal for: For cleaning or maintenance beyond brush replacement
Bottom line: A reliable replacement brush roll that restores your crosswave’s cleaning power efficiently.
Frequently Asked Questions
Why is my Bissell carpet cleaner leaving water behind?
This typically occurs due to clogged filters, damaged seals, or improper tank seating. Regular cleaning and inspection of these parts can prevent leaks.
How do I prevent my machine from leaking water?
Ensure all seals and gaskets are intact and properly seated. Clean filters regularly and check hoses for blockages or kinks.
Can I use household cleaning products to fix leaks?
No, it’s best to use manufacturer-recommended parts and solutions. Avoid harsh chemicals that could damage seals or internal components.
What if my water tank is cracked?
Replace the tank with an OEM or compatible model. Do not attempt to repair cracks with adhesives, as it may cause further leaks.
How often should I clean the filters?
Clean filters after every few uses or when you notice a decrease in suction power. Regular maintenance prolongs the life of your cleaner.
Keep Your Cleaners in Top Shape for Best Results
Maintaining your Bissell carpet cleaner involves regular checks and cleaning of its filters, seals, and hoses. By following these troubleshooting steps, you can prevent water leakage and keep your machine performing at its best. Remember, a well-maintained cleaner not only works more efficiently but also lasts longer, saving you money and effort in the long run.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
