If your Bissell ProHeat 2X Revolution Pet Turbo isn’t spraying water or cleaning solution, don’t worry. This common issue can often be fixed with some straightforward troubleshooting steps. In this guide, we’ll walk you through the main causes and provide clear, safe solutions to get your carpet cleaner back to optimal performance.
Before attempting any fixes, ensure your machine is unplugged for safety. Follow these steps carefully to identify and resolve the spraying problem.
Key Takeaways
| Clogged Nozzle | Blocked spray nozzles prevent solution flow. |
| Solution Tank Issues | Low or improperly seated tank can stop spraying. |
| Pump Failure | A faulty pump can disrupt water flow. |
| Air Blockages | Airlocks in the system may impede spray. |
| Dirty Filters | Clogged filters restrict solution delivery. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Check the Solution Tank
- Ensure the solution tank is filled with cleaning solution and properly seated in the machine.
- Remove the tank carefully, inspect for any cracks or leaks, and clean the fill opening if necessary.
- Reinstall the tank securely, making sure it clicks into place.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Inspect the Spray Nozzles
- Locate the spray nozzles on the cleaning head.
- Use a small pin or needle to gently clear any blockages or debris from the nozzles.
- Rinse the nozzles with warm water and reattach if removed.
Examine the Pump and Hoses
Check the pump for any visible damage or leaks. Listen for unusual noises when attempting to spray, which may indicate a pump issue. Inspect hoses for kinks or blockages and straighten or clear as needed.
Clean or Replace Filters
- Locate the filters, typically near the solution tank or pump.
- Remove and clean them with warm water and mild soap.
- If filters are damaged or excessively clogged, replace them with compatible parts.
Test the Machine
Once you’ve completed the above steps, reassemble all parts and plug in your cleaner. Turn it on and test the spray function on a small carpet area to ensure proper operation.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 17.2 lbs
- ✔ Cord Length: 25 ft
- ✔ Tank Capacity: 1.5 liters
JORAIR Brush Replacement Compatible
- ✔ Package Weight: 1.2 lbs
- ✔ Filter Type: Multi-surface
- ✔ Replacement Interval: Every 3-6 months
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful cleaning with advanced features like Heatwave technology and dual DirtLifter PowerBrushes. When functioning correctly, it provides a deep, professional-grade clean for your carpets.
Pros:
- Powerful suction and cleaning performance
- Quiet operation with noise reduction
- Effective on embedded dirt and stains
- Multiple cleaning modes for versatility
Cons:
- Can clog if not maintained properly
- Requires regular filter cleaning
- Tank removal can be cumbersome
Best for: Pet owners and deep cleaning tasks
Not ideal for: Light or occasional cleaning needs
Bottom line: A reliable, high-performance carpet cleaner with advanced features for pet owners.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible set offers a cost-effective way to keep your Bissell CrossWave performing at its best. Easy to install and highly compatible with various models, it helps maintain optimal cleaning power.
Pros:
- Easy to install
- Affordable replacement parts
- Compatible with multiple CrossWave models
- Includes filters and brushes
Cons:
- Limited to CrossWave models
- Requires periodic replacement
- No additional features
Best for: Maintaining machine performance and longevity
Not ideal for: For users seeking advanced brush technology
Bottom line: A practical kit to keep your CrossWave operating smoothly.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include clogged nozzles, a low or improperly seated solution tank, a faulty pump, airlocks, or dirty filters. Follow the troubleshooting steps above to identify and fix the issue.
How often should I clean the filters?
It’s best to clean the filters once a month or more frequently if you notice reduced spray or suction. Replace them if they are damaged or excessively clogged.
Can I use other solutions besides Bissell’s brand?
For optimal performance and safety, use only solutions recommended by Bissell, such as the Bissell Multi-Surface Solution. Using incompatible products may damage the machine.
What should I do if cleaning nozzles are still clogged after cleaning?
If nozzles remain blocked, consider replacing the spray nozzles or consult Bissell customer support for further assistance.
Restore Your Carpet Cleaner’s Spray in Minutes
By following these simple troubleshooting steps, you can quickly identify and fix common causes of a Bissell carpet cleaner not spraying. Regular maintenance, such as cleaning filters and nozzles, ensures your machine stays in top condition, providing deep and effective cleaning every time. Remember to use compatible solutions and replacement parts for best results, and enjoy fresh, clean carpets with ease.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
